Panasonic UF-890 - Fuser Roller (414), Pressure Roller (409), Eject Roller (422)

38
2.10 Fuser Roller (414), Pressure Roller (409), Eject Roller (422)
(1) Remove the Fuser Unit (431) (Refer to 2.9).
(2) 2 Pressure Springs (412).
(3) 2 C-Rings (418).
(4) Remove the E24 Drive Gear (417).
(5) Remove 2 P17L6.8 Bushings (416).
(6) Remove the Fuser Roller (414).
Caution:
Do not scratch the surface of the Fuser Roller
when removing or re-installing it.
(7) Remove the E22 Gear (425).
(8) 1 Screw (4N).
(9) Remove the Lower Paper Guide (426).
(2)
(3)
(5)
(4)
(6)
(8)
(9)
(7)