21
2.4 Paper Guide Cover (110), Transmit Guide (117), SNS Assembly (121)
(1) Remove the Front Cover (105) and the Rear
Cover (108)
(Refer to 2.3).
(2) 2 Screws (19).
(3) Remove the Paper Guide Cover (110).
(4) 5 Screws (19).
(5) Release two Latch Hooks.
(6) Remove the Transmit Guide (117).
(7) Remove the SNS Assembly Harness from the
clamp.
(8) Disconnect Connector CN7 on the FCB PC
Board.
(2)
(3)
(4)
(4)
(5)
(6)
(7)
(8)