Panasonic UF-890 - ILS PC Board (621), no Paper Actuator (609), Catch Magnet (730)

44
2.13 ILS PC Board (621), No Paper Actuator (609), Catch Magnet (730)
(1) Remove the Front Cover (105), Rear Cover
(108)
(Refer to 2.3), Paper Guide Cover (110)
(Refer to 2.4), Control Panel Unit (Refer to 2.5), and
Motor Bracket and Gear Assembly
(Refer to
2.11).
(2) Remove the ILS PC Board (621).
(3) Remove the No Paper Actuator (609).
(4) Remove the Paper Sensor (610).
(5) Pull out the Paper Sensor from the rear, and
disconnect the Connector.
(6) 2 Screws (19).
(7) Remove the Catch Magnet (730).
(2)
(3)
(4)
(5)
(6)
(7)