43
(10) Remove the E-Ring (5Z).
(11) Remove the Clutch Gear Assembly (660).
(12) 2 Screws (23).
(13) Remove the Paper Feed Rollers (746).
Note:
The Paper Feed Rollers can be accessed from the
bottom of the machine after removing the Paper
Cassette.
(14) Disconnect Connector CN55 on the LPC PC
Board.
(15) 1 Screw (19).
(16) Remove the Paper Feed Solenoid (744).
(17) Disconnect Connector CN54 on the LPC PC
Board.
(18) 2 Screws (1Y).
(19) Remove the Fan Unit (622).
(11)
(10)
(12)
(13)
(14)
(15)
(16)
(18)(18)(19)
(13)(13)
(18)
(13)(13)
(18)
(13)(13)
(17)