Panasonic WJ-NV200K - Page 67

66
67
About playback operation
The following operations are available during playback:
Function Example Operation
[Play]/[Rev play] button
/
 • Playsrecordedimages.
 • Playsbackrecordedimagesinreverse.
* Playback and reverse playback may not work when the [Play]
or [Rev play] button is clicked while recording images at a
lower recording rate.
[Stop] button
 • Playbackwillstopandliveimageswillbedisplayedwhenthis
button is clicked during playback.
[Pause] button
 • Playbackwillbepausedwhenthisbuttonisclickedduring
playback.
 • Playbackwillresumewhenthisbuttonisclickedduringpause.
[FF]/[FR] button
/
 • Playbackspeedoffastplaybackwillbechangedinthefollow-
ing order each time the [FF] button is clicked:
Step2 (Approx. x4) → Step3 (Approx. x8) →
Step4 (Approx. x16) → Step5 (Approx. x32) →
Step6 (Approx. x48) → Step7 (Approx. x96)
 • Playbackspeedoffastreverseplaybackwillbechangedinthe
following order each time the [FR] button is clicked:
Step2 (Approx. x4) → Step3 (Approx. x8) →
Step4 (Approx. x16) → Step5 (Approx. x32) →
Step6 (Approx. x48) → Step7 (Approx. x96)
 • Theplaybackspeedwillbedisplayedontheplaybackstatus
display.
 • WhenplayingH.264/MPEG-4images,someframesofrecord-
ed images will not be displayed. Fast playback/fast reverse
playback of images will be performed with the refresh interval
set for the camera.
[Next record]/
[Prev record] button
/
 • Whenthe[Nextrecord]buttonisclicked,playbackpointwill
skip to the start time of the next recorded images.
 • Whenthe[Prevrecord]buttonisclicked,playbackpointwill
skip to the start time of the previous recorded images.
 • Whenthereisnonext/previousrecordedimagetobeskipped
to, the current playback will continue. In this case, playback
time of the current playback may sometimes be displayed as
around for 1 minute ago.
[Next image]/
[Prev image] button
/
 • Thenextframewillbedisplayedwhenthe[Nextimage]button
is clicked during playback/pause, and playback will pause.
 • Thepreviousframewillbedisplayedwhenthe[Previmage]
button is clicked during playback/pause, and playback will
pause.
 • WhenplayingH.264/MPEG-4images,someframesofrecord-
ed images will not be displayed. Reverse frame by frame play-
back will be performed with the set refresh interval of the cam-
era.
[Go to last] button
 • Skipstoaplaybackpointapprox. 10 seconds before the start
time of the previous recorded images, and plays back the
images.
* When the [Go to last] button is clicked while recording images
at a lower recording rate, playback of the latest recorded
images may be paused or images may not be displayed.
Refer to the page 59 for further information about the [Multiscreen], [Digital zoom] and [Wide view].