16
Monitor Live Images
Screenshot 3
The "Connect" window will be displayed.
Step 3
Select the recorder to access and the desired camera
channel.
Notes:
• Only the recorders registered in advance can be
selected on the "Connect" window. Refer to page 12
for further information.
• The password registered when registered the
recorder will be entered automatically.
• When displaying images from 5 or more camera
channels of the same recorder, or when displaying
recorded images in an area on a multi-screen, only
I-frame will be displayed in all areas on a multi-
screen and audio may not be heard.
It is possible to display live images on a 1-screen or a multi-screen in the image display area.
To monitor live images from the cameras, select the desired camera connected to the recorder first.
Screenshot 1
Start operation when the operation window is being dis-
played.
Step 1
Right-click on a blank area in the image display area.
Screenshot 2
The pop-up menu will be displayed.
Step 2
Select "Connect".
To Next Page
Loading...
