Panasonic WJ-RT416 - Check of the System Information and Disk Information of the Recorder (Information); Start;Stop of the Manual Recording Using this Software (Manual Rec. Control)

41
Start/stop of the manual recording using this software (Manual Rec. Control)
It is possible to start and stop the manual recording using this software.
Screenshot 1
Select "Manual Rec. Control" from the pop-up menu
(☞ page 35).
→ The "Manual Rec. Control" window will be displayed.
Step 1
Select "On" or "Off" to start or stop the manual record-
ing.
On: Starts the manual recording using this software.
Off: Stops the manual recording using this software.
Step 2
Click the [Apply] button.
→ The selected operation will be carried out.
Check of the system information and disk information of the recorder (Information)
It is possible to check the system information and the disk information of the recorder.
Select "Information" from the pop-up menu (☞ page 35).
→ The "Information" window will be displayed.
Check the desired information on this window.