40
Check of each log of the recorder (Log)
It is possible to check the alarm log, error log, operation log, access log and network log of the recorder.
The contents of each log are the same as the contents that can be checked on the SETUP MENU (Maintenance).
Refer to the installation guide of the recorder for further information.
It is also possible to save each log on the PC in the CSV format by clicking the [Save] button.
Select "Log" from the pop-up menu (☞ page 35).
→ The "Log" window will be displayed.
[Network log] tab
It is possible to check logs about the network error occurrences (time and date of the network error occurrence and
event).
Note:
Up to 100 error logs can be kept. When more than 100 event logs are filed, the older event logs will be overwrit-
ten by the newer event logs. In this case, the oldest log is the first to be overwritten.
The descriptions of the network logs are as follows.
SMTPPOP3ATTEST_ERR POP3 authentication error
SMTPPOP3SVR_ERR Failed to find POP3 server
SMTPPOP3ADD_ERR Failed to resolve POP3 server address
SMTPATTEST_ERR SMTP authentication error
SMTPSVR_ERR Failed to find SMTP server
SMTPSVRADD_ERR Failed to resolve SMTP server address
SMTPOTHER Other errors for SMTP
DNSOTHER Other errors for DNS
NTPGETTIME_OK Synchronization with the NTP server complete
NTPSVRADD_ERR Failed to resolve NTP server address
NTPSVRRES_ERR No response from the NTP server
NTPOTHER Other errors for NTP
DHCPIPADDUPDATE_ERR DHCP IP address update failure
DHCPIPADD_LOST DHCP lost
DHCPOTHER Other errors for DHCP
To Next Page
Loading...
