44
Download/upload of the language data from/to the recorder Language Data
Download/Upload (Maintenance – Language Data Download/Upload)
It is possible to download/upload the customized language data from/to the recorder. The default language of the
custom language is English.
Select "Language Data Download/Upload" under "Maintenance" from the pop-up menu (☞ page 35).
→ The "Language Data Download/Upload" window will be displayed.
Download the language data
Step 1
Click the [Download] button.
Step 2
Designate the directory in which the language data is to be downloaded (default name: RT4Lang.txt), and then click
the [Save] button.
→ Download of the language data will start.
Upload the language data
Click the [Choose File] button, and then select the language data to be uploaded.
Step 1
Click the [Upload] button.
→ Upload of the language data will start.
Notes:
• Available characters for the custom language are as follows. (Some characters may not be displayed.)
• Basic Latin, Latin Extended-A, Cyrillic
• Depending on the number of characters, it may fail to upload of the custom language data.
• The character code of a file to be uploaded shall be UTF-8.
• It is recommended to save the current data as a backup before uploading the language data since it will be over-
written when the language data is uploaded.
It is also recommended to save it before upgrading the firmware since it will be reset to the default.
To Next Page
Loading...
