37
[NTP Setup] tab
■ Time Adjustment
Select "On" or "Off" to determine whether or not to
adjust time by synchronizing with the NTP server.
Default: Off
■ NTP Server Address
Enter the NTP server address when "On" is selected for
"NTP Synchronization".
Enter up to 128 alphanumeric characters (including
hyphens (-), periods (.) and underscores (_)).
■ Refresh Interval
Select an interval of time inquiry to the NTP server from
the following.
1h, 2h, 6h, 12h, 24h
Default: 1h
To Next Page
Loading...
