Panasonic Workio DP-190

143
Setting
Your Machine
142 RELAY XMT
(A.K.A. LAN RELAY
STATION ON UF-770I)
1 Invalid Selecting whether the machine accepts and performs
G3 relayed transmission. (Relay Station Functions)
*2 Valid
143 RELAY XMT REPORT 1 Off Setting how the COMM. Journal for relayed
transmission is sent to the originator.
Off : Don’t send.
Always : Always send.
Inc. Only : Send only if communication has failed.
*2 Always
3 Inc. Only
144 EMAIL CHARACTER
SET
1 Japanese Selecting the Character Set when receiving or sending
email text.
*2 English
145 SENDER SELECTION *1 Invalid Selecting a pre-programmed sender’s name and email
address before each transmission.
2 Valid
146 POP TIMER ---- 0 to 60 min. Setting the time interval for the machine to check for
email on the POP Server.
(0 = Does not check the POP Server for email.)
*3
147 AUTO POP RCV 1 Invalid Selecting whether the machine automatically
downloads an email from the POP Server.
*2 Valid
148 DELETE POP RCV
EMAIL
1 Invalid Selecting whether the email will be deleted
automatically after retrieval from the POP Server.
*2 Valid
149 DELETE POP ERROR
EMAIL
*1 Invalid Selecting whether to delete the email that includes an
incompatible file attachment from the POP Server.
2 Valid
150 Internet Fax RETURN
RECEIPT
1 Invalid Selecting whether to send a return receipt when
receiving from another Panasonic Internet Fax.
*2 Valid
151 EMAIL HEADER
FORMAT
1 All Selecting the header information to print when an email
is received. (Normally used for Troubleshooting. It
shows the path of the email transmission before
arriving at your machine.)
*2 Subject/
From/To
3 Off
152 SUB-ADDRESS
ROUTING
*1 Invalid Selecting whether to automatically route a received fax
or email using ITU-T sub-address.
2 Valid
153 TSI ROUTING *1 Invalid Selecting whether to route a received fax to a
telephone number or an email address
preprogrammed in Phone Book using the originating
fax’s Numeric ID (TSI frame information).
2 Valid
154 ROUTING HEADER
FORMAT
*1 Originator Selecting the type of email header to be included in the
“From” field of each routed faxes.
Originator :The originating fax machine’s TSI will
appear in the “From” field of the
routed email.
Relay Station :The routing station’s email address
will appear in the “From” field of the
routed email.
2 Relay
Station
155 PRINT ROUTED
DOCUMENT
*1 Inc. Only Selecting whether a received fax to be routed is always
printed or only when the routing operation fails.
2 Always
156 PRINT FORWARDED
DOCUMENT
*1 Inc. Only Selecting whether a memory received fax or email to
be forwarded is always printed or only when forwarding
is incomplete.
2 Always
No. Parameter Setting
Number
Setting Comments
Continued on the next page...