Panasonic WV-CW590G

15
2. PresstheCAM(SET)button.
This will display the scene file setting menu.
The following items can be set on the Scene file
settings menu. See camera settings for details on
each setting.
 • SHUTTER(page10)
 • AGC(page10)
 • SENSUP(page10)
 • WHITEBAL(page11)
 • VMD(page22)
l Preset Speed Setting (PRESET SPEED)
Set the speed the camera moves to the various preset
positions for the sequence and sort operations (page
16).
1. Move the cursor to PRESET SPEED, and then tilt the
joystick left or right to change the speed setting.
Shifting the setting towards the L side decreases the
speed, while shifting towards the H side increase it.
The factory default setting is 255.
l Deleting a Preset Position (DEL)
1. Move the cursor to DEL, and then press the CAM
(SET)button.
This deletes the contents of the currently selected
position number and displays the position selection
menu.
l Auto Focus (AF MODE)
1. Move the cursor to AF MODE, and then tilt the
joystick left or right to select an auto-focus function
setting.
MANUAL S.M.L : Auto focus does not operate
after moving to a preset position.
AUTO S.M.L : Auto focus operates after
moving to a preset position.
  ThefactorydefaultsettingisMANUALL.
l Sequence/Sort DWELL Time (DWELL TIME)
Thissectionexplainshowtosetthe lengthoftimethe
camera stops (time it stops rotating) and tapes the
scene while in the various preset positions for the
sequenceandsortoperations(page16).
1. Move the cursor to DWELL TIME, and then tilt the
joystick left or right to select a DWELL time setting.
Tilting the joystick cycles through the stop time
displayinthesequenceshownbelow.(unit:sec,min)
The factory default setting is 10S.
l Scene File Setting (SCENE FILE)
Up to 10 scene files, each of which contains camera
settings for a specific location (scene), can be stored
in memory. Scene files are managed using scene file
numbers from 1 through 10 (scene file number), and
can be selected when configuring preset position
settings.
The following procedures explain how to select a
scene file and how to configure scene file settings.
(1)SelectingaSceneFile
Use this procedure when you want to apply the
settings of a previously stored scene file when you are
configuring the settings of a preset position.
1. MovethecursortoSCENEFILE,andthentiltitleft
and right to select the number of the scene file you
want to select.
  ThefactorydefaultsettingisOFF.
(2)ConfiguringSceneFileSettings
1. MovethecursortoSCENEFILE,andthentiltitleft
and right to select the number of the scene file
whosesettingsyouwanttoconfigure(1to10).
PRESET NO. 1
POSITION SET
PRESET ID
ALC/MANUAL
AF MODE
DWELL TIME
SCENE FILE
PRESET SPEED
RET TOP DEL
ON
ALC
MANUAL L
10S
1
••••••I255
L H
**SCENE FILE 1**
SHUTTER
AGC
SENS UP
WHITE BAL
VMD
RET TOP
AUTO
ON(MID)
OFF
ATW1
OFF
PRESET NO. 1
POSITION SET
PRESET ID
ALC/MANUAL
AF MODE
DWELL TIME
SCENE FILE
PRESET SPEED
RET TOP DEL
ON
ALC
MANUAL L
10S
OFF
••••••I255
L H
2S ↔ 3S ↔ 5S ↔ 10S ↔ 30S ↔ 1MIN
4MIN ↔ 3MIN ↔ 2MIN
PRESET NO. 1
POSITION SET
PRESET ID
ALC/MANUAL
AF MODE
DWELL TIME
SCENE FILE
PRESET SPEED
RET TOP DEL
ON
ALC
MANUAL L
10S
OFF
••••••I255
L H
PRESET NO. 1
POSITION SET
PRESET ID
ALC/MANUAL
AF MODE
DWELL TIME
SCENE FILE
PRESET SPEED
RET TOP DEL
ON
ALC
MANUAL L
10S
OFF
••••••I255
L H
**PRESET POSITION**
2*
6*
10*
14*
18*
22*
26*
30*
3*
7*
11*
15*
19*
23*
27*
31*
4*
8*
12*
16*
20*
24*
28*
32*
1
5*
9*
13*
17*
21*
25*
29*
ID:
033-064 225-256
RET TOP