Panasonic WV-CW590G

16
Notes:
•The HOME setting should be selected when you
want to normally leave the camera in the home
position and occasionally perform pan and tilt, or
when you want to activate SEQ.
•PTR1-4 displays only the set number of patrol
routines(page17).
5 Auto Mode Setting (AUTO MODE)
Use the auto mode setting to specify the camera
movement mode (OFF, SEQ, SORT, AUTOPAN,
PATROL1~4,AUTOTRACK).
Afterselecting AUTOPAN, youcan use the AUTOPAN
setting menu to configure detailed settings.
1. Move the cursor to AUTO MODE, and then tilt the
joystick left or right to select a camera movement
mode setting.
OFF : Manual movement only
SEQ : Sequentially switches between preset
positions in position number sequence.
(sequentialmovement)
SORT : Sequentially switches between preset
positions counterclockwise, starting from the
camerahomeposition.(sortmovement)
AUTOPAN :
Camera pans automatically within the
range specified by PAN. Selecting AUTOPAN
andpressingtheCAM(SET)buttonwilldisplay
theAUTOPANsettingmenu,whichcanbeused
forconfiguringdetailedsettings.(page17)
PATROL 1 to 4 : Operates the camera in
accordance with patrol function settings.
AUTOTRACK : Auto tracking is done for moving
objects under the following conditions.
The moving object must be larger than one
ofthescreenblocks(1/48ofscreenarea),it
must have 5 % comparative contrast with
the background image.
ThefactorydefaultsettingisOFF.
Tilting the joystick cycles through settings in the
sequence shown below.
3 Home Position Setting (HOME POSITION)
A currently configured preset position can be
designated as the home position.
PressingtheHOMEbuttonofthesystemcontrollerwill
cause the camera to move to the currently specified
home position. Use the following procedure to make a
preset position the home position.
ThefactorydefaultsettingisOFF.
1. Move the cursor to HOME POSITION, and then tilt
the joystick left or right to select the position
number of the preset position you want to make the
home position.
This causes the preset position whose position
number you select to become the home position. If
you do not want to use the home position function,
selectOFFfortheHOMEPOSITIONsetting.
4 Self Return Setting (SELF RETURN)
The self return setting can be used to specify automatic
return to a particular mode if a certain amount of time
elapses without any operation being performed.
1. Move thecursortoSELFRETURN, andthen tilt the
joystick left or right to select a self return trigger setting.
Tilting the joystick cycles through the self return
displayinthesequenceshownbelow.(unit:sec,min)
  ThefactorydefaultsettingisOFF.
2. IfyouselectedanysettingotherthanOFFinstep1,
presstheCAM(SET)buttonandthentiltthejoystick
left or right to select a self return mode.
OFF : In the auto mode, exits theautomode
when the trigger time elapses.
AUTO : Auto mode setting not OFF, returns to
the auto mode when the trigger time
elapses, auto mode setting OFF,
returns to the home position when the
trigger time elapses.
HOME : Returns to the home position when the
trigger time elapses.
APAN : Activates autopan when the trigger
time elapses.
SEQ : Activates the sequence function when
the trigger time elapses.
SORT : Activates the sort function when the
trigger time elapses.
PTR 1 to 4 : Activates the patrol function when the
trigger time elapses.
TRK : After the trigger time elapses, the
camera returns to the home position
and then automatic tracking starts.
Following that, after a set time, the
camera returns to the home position
and starts to continue automatic
tracking.
  ThefactorydefaultsettingisAUTO.
30MIN ↔ 20MIN ↔ 10MIN ↔ 5MIN ↔ 3MIN ↔ 2MIN ↔ 1MIN
OFF ↔ 1S ↔ 2S ↔ 3S ↔
.......
↔ 10S ↔ 20S ↔ 30S ↔ 40S
60MIN 50S
↔ ↔ ↔ ↔
OFF ↔ AUTO ↔ HOME ↔ APAN ↔ SEQ ↔ SORT
TRK ↔ PTR4 ↔ PTR3 ↔ PTR2 ↔ PTR1
Notes:
•Automatictrackingcoversarangefromhorizontalto
directly below the camera. The digital flip function
(page20)doesnotoperate.Also,thepanrangecan
belimitedbyusingthePANLIMITsetting(page17).
•Theautomatictrackingfunctionincorporatedinthis
system easily tracks moving objects on screen.
Moving subjects are not automatically tracked in the
following situations.
 •Whenmultiplemovingsubjectsareonscreen
 •Whenthesubjectsaremovingveryfast
 •Whentheimageisdark
 •Whenthesubjecthaslittlecontrast
 •Whenmovingobjectsareeitherlargeorsmall
 •Whentheimageflickers
 •Auto mode is the mode currently in operation.
Auto mode is automatically adjusted when
changes are made to the operation or other
settings using the system controller.
 •
AUTOMODE:Shouldbethemodecurrentlyinoperation.
 •PressingtheAUTOPANbuttonfromthecontroller
should change AUTO MODE to the value of
AUTOPANKEY.
OFF ↔ SEQ ↔ SORT ↔ AUTOPAN ↔ PAT ROL1 ↔ PAT ROL2
AUTOTRACK ↔ PAT ROL4 ↔ PAT ROL3