Panasonic WV-SFV531 - User Manual

Other manuals for Panasonic WV-SFV531

Installation Guide2 pages

Important Information32 pages

Questions and Answers:

K
Kyle ByrdSep 12, 2025
Why is my Panasonic WV-SFV531 Security Camera not turning on?
- J
  Jason ChenSep 12, 2025
  If your Panasonic Security Camera isn't powering on when using a PoE device, ensure the PoE device and network connector are connected with a LAN cable (category 5 or better) and that the connection is properly established. Note that some PoE devices stop power supply when the power demand exceeds their limit. If using both a 12 V DC power supply and a PoE device, the network connection might fail, so turn off the power supply from the PoE device. If you are using DC power supply, make sure the 12 V DC power cable plug is firmly inserted into the camera's 12 V DC power terminals and that the AC adapter meets the specifications.
L
Lauren SalazarSep 12, 2025
What to do if the LINK indicator does not light on Panasonic WV-SFV531 Security Camera?
- C
  cookjulieSep 13, 2025
  If the LINK indicator on your Panasonic Security Camera doesn't light up orange when the network cable is connected, ensure the LAN cable is correctly connected. Verify that the hub or router connected to the camera is functioning properly. Also, check if the LAN cable is damaged and replace it if necessary.
K
Kenneth YoungSep 14, 2025
Why does SD ERROR/AF indicator light up red on Panasonic WV-SFV531?
- R
  Raymond DavidsonSep 15, 2025
  If the SD ERROR/AF indicator lights up red on your Panasonic Security Camera, it indicates that data cannot be saved to the SD memory card. Ensure the write protect switch on the SD card is unlocked. Format the SD memory card using the camera itself, or install compatible software on your PC for formatting. If the SD card is faulty, replace it with a working one.
L
lewislindaSep 16, 2025
How to fix audio input noise on Panasonic WV-SFV531 Security Camera?
- S
  sarah26Sep 16, 2025
  If the audio input of your Panasonic Security Camera contains noise, check the following: ensure the camera, switching hub, and peripheral devices are properly grounded. Avoid using the camera near electrical power lines or devices producing strong magnetic fields or radio waves like TV/radio antennas, air conditioning motors, or transformers. If noise persists, consider using a powered microphone or connecting audio output with low output impedance.

Panasonic WV-SFV531 Specifications

General

Maximum Resolution	1920 x 1080
Lens Type	Fixed
Lens Focal Length	2.8 mm
Power Supply	PoE (IEEE 802.3af)
Operating Temperature	-10 °C to +50 °C
Frame Rate	Up to 30 fps
Day/Night Function	Yes
Wide Dynamic Range (WDR)	Yes
Audio	Two-way audio
Ethernet	10BASE-T / 100BASE-TX
Ingress Protection	IP66
Vandal Resistance	IK10
Image Sensor	1/3 type MOS sensor
Video Compression	H.264, JPEG
Weight	Approx. 800 g
Angle of View	H: 102°, V: 56°
Audio Compression	G.711
Protocols	IPv4, IPv6, TCP, UDP, HTTP, HTTPS, SMTP, FTP, SNMP, DHCP, DNS, NTP
Edge Recording	Yes
Power Source	PoE
Network Interface	RJ-45 (10BASE-T/100BASE-TX)
Lens	2.8 mm to 8 mm, F1.6
Camera Type	Dome
Effective Pixels	2 Megapixels