24
Connection example when connecting to a network using a
PoE hub
<Required cable>
LANcable(category5orbetter,straight,STP:ForEurope)
UseaLANcable(category5orbetter,cross)whendirectlyconnectingthecameratoaPC.
*Recommendedcablelengthfromthespeaker:lessthan10m{32.8feet}
Recommendedcablelengthfromthemicrophone:lessthan1m{3.28feet}
IMPORTANT:
• Theadjustmentmonitorisusedforcheckingtheadjustmentoftheangularfieldofviewwhen
installingthecameraorwhenservicing.Itisnotprovidedforrecording/monitoringuse.
• Dependingonthemonitor,somecharacters(cameratitle,presetID,etc.)maynotbedisplayed
onthescreen.
• Useaswitchinghuborarouterwhichiscompliantwith10BASE-T/100BASE-TX.
• IfaPoEhubisnotused,eachnetworkcameramustbeconnectedtoa12VDCpowersupply.
• Whenusing12VDC,powersupplyfromaPoEhuborrouterisnotrequired.
• Network cameraisintendedforconnectiontoanethernetorPoEnetworkwithout routingto
theoutsideplant.
Powered speaker
Powered speaker
Recommended
total extended
cable length*
Adjustment monitor
Adjustment monitor
LAN cable
(category 5 or better, straight, STP: For Europe)
LAN cable
(category 5 or better,
straight, STP: For
Europe)
LAN cable
(category 5 or better,
straight, STP: For Europe)
Microphone
PoE device (hub)
PC
Microphone