18
IMPORTANT:
• When inserting an SDHC/SD memory card, make sure the direction.
• Before removing the SDHC/SD memory card, select "Not use" for "SD memory card" on the
[SD memory card] tab of the setup menu first. (
☞ Operating Instructions (included in the
CD-ROM))
a Loosen the SD cover screw, open the
SD cover.
b Insert an SDHC/SD memory card fully
into the SDHC/SD memory card slot
until a click is heard.
c Close the SD cover and tighten the SD
cover screw.
(Recommended tightening torque: 0.58 N·m
{0.43 lbf·ft})
d When removing the SDHC/SD memory
card from the SDHC/SD memory card
slot, loosen the SD cover screw, open
the SD cover, and push the card until a
click is heard. After the SDHC/SD mem-
ory card is removed, close the SD cover
and tighten the SD cover screw again.
Insert/remove an SDHC/SD memory card
Label side