22
a Adjust the camera angle.
When determining the camera angle, repeat fine adjustments by gradually moving the panning
table and tilting table.
• Attach the lens adjuster (accessory) to the lens and adjust the direction of the lens. Attach the
wider end of the lens adjuster to the lens.
• Do not touch the lens with your hand when making adjustments.
• Make adjustments to the direction of the lens while confirming the picture displayed on com-
puter’s monitor.
Adjustment
Note:
• Depending on the vertical/horizontal angle used, the edges of the camera may be projected.
• Use Extra Zoom when you want to adjust the angular field of view on the "Tele" side. When
VGA or a lower resolution is selected, the angular field of view can be adjusted without deterio-
ration in the image quality.
• If the 2x extra zoom is applied when "1280x960" or "1280x720" is selected for the image cap-
ture size, the image quality will be deteriorated because the effect of Extra Zoom is not provided.
Vertical position: ±30 °
Horizontal position: ±30 °
To Next Page
Loading...
