20
Using a gang junction box
• Securethemountbrackettothegangjunctionboxbuiltinawall.
<Install camera with a one-gang junction box through mounting screw hole C>
One-gang junction box
Mount bracket
83.5 mm {3-9/32 inches}
IMPORTANT:
• Donottouchthelens.
• Whentighteningthescrews,becarefultoensurethatthecablesdoesnottanglethecables.
• Beforeinstallingthe camera, make surethatthe mount bracket rubber A hasbeencorrectly
mounted.Inaddition,removethedustordirt,ifany,fromthemountbracketrubberA.
• Beforeinstallingthecamera,besuretoremovethedust,ifany,fromunderthemountbracket
whenthecableaccessholeisopen.
Camera tamperproof screw
Cable access hole
Fixing screw hole
Mount bracket
Wall