19
Using the mount bracket (accessory)
Note:
• When the camera is mounted on the ceiling or wall with a hole for cable running and the cables
are passed through a conduit, the mount bracket is used.
• The female thread for conduit is compliant with ANSI NPSM (parallel pipe threads) 3/4" or G3/4
of ISO 228-1.
• Ceiling installation:
The mount bracket shall be mounted with aligning the front side (the lens side) of the camera
with the position of the arrow in "h".
• Wall installation:
The mount bracket shall be mounted with "h" facing upward.
Important:
• Installation work shall be such that there is no intrusion of water into the architecture through
the joined conduits, or through the hole opened for the ceiling or wall.
n
Ceiling
n
Wall
To Next Page
Loading...
