Panasonic WV-SW598

Other manuals for Panasonic WV-SW598

Installation Guide48 pages

Specifications2 pages

Questions and Answers:

C
Christina BurtonSep 12, 2025
How to fix Panasonic Security Camera when I cannot access it from the web browser?
- A
  Anna RogersSep 12, 2025
  First, ensure the LAN cable (category 5e or better) is firmly connected to the camera's network connector. Check if the link indicator is lit; if not, there may be a LAN connection issue or network malfunction. Verify that the camera's power is on and that the set IP addresses are valid. Ping the camera's IP address to check the connection; if there's no reply, examine the connection methods.
K
Kelly MooreSep 12, 2025
What to do if raindrops obscure images on my Panasonic WV-SW598?
- J
  jameschenSep 12, 2025
  If it's hard to see images with your Panasonic Security Camera when there are raindrops on the dome cover, the rain wash coating may have become less effective. Clean the dome cover by referring to 'Cleaning this product body' in 'Precautions for use'.
A
Andre SingletonSep 10, 2025
Why does my Panasonic Security Camera start panning on its own?
- J
  Jonathan SmithSep 10, 2025
  If your Panasonic Security Camera starts panning unpredictably, it may be due to noise. Check the exogenous noise level around the camera.
M
Mitchell FoxSep 9, 2025
How to fix inaccurate preset positions on a Panasonic WV-SW598 Security Camera?
- B
  Bianca DicksonSep 9, 2025
  If your Panasonic Security Camera doesn't move to the preset positions accurately, try executing the position refresh function. You can also set 'Position refresh' for the created schedule so the camera position will be corrected periodically. In some cases, it may be necessary to reconfigure the preset positions.
W
William ProctorSep 8, 2025
Why is the live indicator red on my Panasonic WV-SW598?
- N
  nicole12Sep 8, 2025
  If the live indicator on your Panasonic Security Camera lights up red, check if the write protect switch on the SD memory card is set to 'LOCK'. If it is, unlock the switch. Also, ensure that the SD memory card was formatted on the camera, not a PC. If the problem persists, the SD memory card may be faulty, so replace it with a normal one.
A
Andrew GreenAug 23, 2025
How to fix Panasonic Security Camera cannot access from the web browser?
- M
  Mrs. Kelly Wood DVMAug 23, 2025
  If you cannot access your Panasonic Security Camera from a web browser, first check if the LAN cable (category 5e or better) is firmly connected to the camera's network connector. Also, verify that the link indicator is lit, indicating a proper LAN connection. If it's not lit, there may be a contact failure or incorrect wiring. Ensure the camera is powered on and that the IP addresses are valid. Finally, confirm you are accessing the camera using the correct IP address.
C
Chad Jensen MDSep 6, 2025
Why is the live indicator not lighting up on my Panasonic WV-SW598 Security Camera?
- A
  Alexander LeeSep 6, 2025
  If the live indicator on your Panasonic Security Camera never lights up, check if 'Off' is selected for 'Link/Access LED' on the 'Basic' page. If it is, select 'On' or 'On(Access)' for the indicator setting.
S
Shawn AtkinsonSep 5, 2025
How to troubleshoot power issues on a Panasonic WV-SW598 Security Camera?
- C
  Cynthia DeanSep 5, 2025
  If the power isn't turning on for your Panasonic Security Camera when using a PoE+ device, verify the connection is properly established. Note that some PoE+ devices will stop power supply if the total power limit for all PoE+ ports is exceeded, so consult the device's instructions. If using both a 24V AC power supply and a PoE+ device, turn down the power supply from the PoE+ device. If you're using AC power, ensure that connection is correctly established and that the power supply connector housing is firmly attached to the camera.
A
Anthony BarnettSep 4, 2025
What to do if the live indicator lights or blinks orange on Panasonic Security Camera?
- K
  Kayla SmithSep 4, 2025
  If the live indicator on your Panasonic Security Camera lights or blinks orange when you turn on the power, make sure the LAN cable is properly connected. Also, check that the hub or router connected to the camera is working correctly. If the issue continues, try replacing the LAN cable.
B
Billy McdowellSep 3, 2025
What to do if it is hard to see images with Panasonic WV-SW598 because of raindrops?
- C
  christylambSep 3, 2025
  The effectiveness of the rain wash coating may have been reduced. Refer to 'Cleaning this product body' in 'Precautions for use' and clean the dome cover.

Panasonic WV-SW598 Specifications

General

Type	IP security camera
PTZ control	Yes
Certification	UL (UL60950-1), C-UL (CAN/CSA C22.2 No.60950-1), CE, IEC60950-1, EMC, FCC Part15 Class A, ICES-003 Class A, EN55022 Class B, EN55024
Placement supported	Indoor & outdoor
Connectivity technology	Wired
Form factor	Dome
Mounting type	Ceiling
Product color	Black, Silver
International Protection (IP) code	IP66
Total megapixels	2.4 MP
Maximum resolution	1920 x 1080 pixels
Supported video modes	1080p, 720p
Video formats supported	H.264
Pan range	0 - 360 °
Pan speed	0.065 °/sec
White balance	ATW
Minimum illumination	0.004 lx
Sensor type	MOS
Optical sensor size	1/3 \
Digital zoom	12 x
Optical zoom	30 x
Focal length range	4.3 - 129 mm
Built-in HDD	-
Compatible memory cards	SD, SDHC, SDXC
Cabling technology	10/100Base-T(X)
Supported network protocols	IPv6:TCP/IP, UDP/IP, HTTP, HTTPS, RTP, FTP, SMTP, DNS, NTP, SNMP, DHCPv6 , ICMP, ARP; IPv4:TCP/IP, UDP/IP, HTTP, HTTPS, RTSP, RTP, RTP/RTCP, FTP, SMTP, DHCP, DNS, DDNS, NTP, SNMP, UPnP, IGMP, ICMP, ARP
Ethernet LAN (RJ-45) ports	1
Power consumption	470 mA
Power source type	PoE
Still image resolution(s)	1920 x 1080, 640 x 360, 320 x 180, 1280 x 720, 1280 x 960, 320 x 240, 640 x 480
Number of simultaneous users	14 user(s)