Note
• A selectable area is limited.
2. Select [On]/[Off] to activate/deactivate a distributed image of [VIQS(H.264(1))] or [VIQS(H.264(2))].
3. Click the [Set] button.
→ This unit is updated with the setting contents. Click the [Delete] button corresponding to the area to be
deleted.
IMPORTANT
• No setting contents are determined unless the [Set] button is clicked.
• To check the window after VIQS setting, display an H.264 image on the “Live” page.
128 Operating Instructions
11 Configure the settings relating to images and audio [Image/Audio]
To Next Page
Loading...
