31
8 Settings and Operations
(continue)
●The confirmation method of the remaining
number of times and remaining duration
During the status of displaying the setting of 【the
cutting torch monitoring number of times setting
「p04」】 and 【the cutting torch monitoring time
setting 「 p05 」】 , if the DECIDE button is
long-pressed, when submenu is 【 the cutting
torch monitoring number of times 「P04」】, the
present remaining number of times can be
displayed. When submenu is 【the cutting torch
monitoring time setting 「p05」】, the present
remaining cutting time can be displayed.
The setting the cutting torch monitoring number of
times is「P04」
8.6.3 The setting modification method
(1) Enter direct setting or submenu 【the cutting
torch monitoring selection (p02) 】. Turn the dial
and set on「(off) 」, press the DECIDE button.
·For direct setting
·For the setting under the submenu
blink
To Next Page
Loading...
