Pandora Camper User Manual

13
12
USER MANUALSECURITY-SERVICE SYSTEM PANDORA CAMPER
EN
• Fuel level (status)
• Parking (automatic gearbox) /Handbrake (manual gearbox) status
• “Parking light is not turned off” notification (status)
• Shock sensor (security zone – alarm and warning level)
• Motion sensor (security zone – alarm level)
• Tilt sensor (security zone – alarm level)
• OE alarm system status via CAN, additional sensor (status, security zone – alarm and warning level)
• Turning ignition on (status, security zone – alarm level)
• Opening doors (status, security zone – alarm level)
• Opening a trunk (status, security zone – alarm level)
• Opening a hood (status, security zone – alarm level)
• Pressing brake (status, security zone – alarm level)
Sound and light signalization
DESCRIPTION STATE
(sound/light)
Arming
1х
/1х
Disarming
2х
/2х
Car search
5х
/5х
Alarm, PANIC mode
30sec.
/30sec.
Warning level of a sensor is triggerd
3х
/1х
‘Sensors were triggered’ signal when disarming /
Parking light is not turned o notication /
‘Sensors are triggered” signal when arming
4х
/4х
Engine blocking warning in Anti-Hi-Jack mode
30sec.
/30sec.
Stay Home mode
This mode is used to control the outer perimeter of a vehicle during parking when passengers are inside
the vehicle. This mode allows the system to protect your vehicle against intrusion through the parts of
the vehicle that can be open.
• The system will be armed silently when you activate the “Stay Home” mode, it will be confirmed
with 1х
light signal. The system controls vehicle security zones and an additional gas sensor (it is
not included in the set) in this mode, built-in sensors (shock/tilt/motion) are disabled in this mode.
• The system will be disarmed when you deactivate the “Stay Home” mode, it will be confirmed with
2х
sound and 1х
light signals.
Slave mode
This mode allows arming and disarming using original vehicle control – an original key, button/sensor
of a keyless access entry system.
Slave mode can be implemented using analog connections or a digital protocol of a vehicle.
!
This mode is enabled by defaulT for a digiTal proTocol. more informaTion on loader.pandorainfo.com. iT is
recommended To acTivaTe The “prohibiT disarming when a Tag is absenT” To increase securiTy feaTures of The slave
mode. if This mode is acTivaTed, iT will be possible To disarm The sysTem only when a Tag is in The coverage zone or using
The “secreT pin-code”.
Owner authorization devices and functions
Authorization devices
Authorization devices are Bluetooth-devices used to recognize an owner in the radio coverage zone
of the base unit. These devices allow implementing security and anti-hijack functions. You can use a
mobile phone, a radio tag BT-760 or a remote control D030 as an authorization device.
Alerts when using authorization devices
It is recommended to use an additional sound emitter Beeper when you use authorization devices.

Pandora Camper Specifications

General

Brand	Pandora
Model	Camper
Category	Security System
Language	English