54
USER MANUAL
PANDORA MINI V3 CAR SERVICE-SECURITY SYSTEM
System set
Base unit 1
Immobilizer tag 2
Blocking relay 1
Cable with VALET button 1
User installation manual 1
Personal owner’s card 1
Beeper (compact sound emitter) 1
Main cable 1
Fastening kit 1
Packaging 1
mANufActuReR ReseRves the RIGht to chANGe set ANd coNstRuctIoN of the pRod-
uct to ImpRove Its techNoloGIcAl ANd opeRAtIoNAl pARAmeteRs WIthout NotIfIcA-
tIoN.
SYSTEM FEATURES
Base unit
• Integrated 2.4 GHz module with support of Bluetooth 5.0
• Built-in integral accelerometer for deterMini v3ng motion/shock/tilt with
adaptive processing algorithm and sensitivity controls
Built-in micro-USB port
• Integrated temperature sensor (interior temperature)
• Dialog coding of control commands with 128-bit encryption keys (a key is
changed each time an additional device is recorded)
• Individual “Secret PIN-code”, changeable “Service PIN-code” and “Immobi-
lizer PIN-code”
Control and monitoring
Control of the vehicles zones depends on the type of connection and system
settings, original car operation and trim.
Analog connection – It is a direct connection of analog inputs and outputs
to electrical circuits of a vehicle in accordance with a connection diagram.
Digital connection – It is a connection to digital (CAN, LIN) buses. It allows
reading information (statuses) and controlling vehicles (commands) by digital
buses of the vehicles. The detailed information about digital protocols is avail-
able on loader.pandorainfo.com. The declared statuses may not be available
for certain vehicle trims.
Built-in sensors – These sensors are integrated in the base unit. The sensors
perform control and protection of the vehicle. Additional connections are not
required
Additional sensor (*optional) – External additional sensors are connected
to the base unit.
To Next Page
Loading...
