Panduit PanTher LS8EQ User Manual

INTRODUCTION & SAFE OPERATION
4
Congratulations on your purchase of the P
ANTHER™ LS8EQ Hand-Held Thermal
Transfer Printer. The versatile P
ANTHER™ LS8EQ is designed to meet the
demanding printing requirements of electrical and network users. The LS8EQ
prints high quality industrial labels on a wide variety of materials for electrical and
network applications, such as wire/cable, components, safety, and facility
identification. It is the ideal labeling tool for electricians, installers, maintenance
personnel, and contractors. As you will read throughout this operator’s manual,
the
PANTHER™ LS8EQ has been designed with many time saving features that will
allow you to maximize your labeling productivity.
This manual will guide you step by step through the set-up, operation, and
troubleshooting of the PANTHER™ LS8EQ Hand-held Thermal Transfer Printer. If
you have problems not covered herein, contact your local Panduit Sales
Representative, call Panduit Technical Support at 866-871-4571, or call Panduit
Customer Service at 800-777-3300. More information is also available on the
web at www.panduit.com.
SAFE OPERATION PRACTICES
The following general safety practices supplement the specific warnings and
cautions depicted elsewhere in this manual. They are recommended precautions
that must be understood and applied during the operation and maintenance of this
printer.
Do Not Operate In An Explosive Environment
Do not operate the printer in the presence of flammable gases or fumes.
Operation of this printer in such an environment constitutes a definite safety
hazard.
Do Not Operate In Wet Or Damp Areas
Do not operate this printer in wet or damp areas. Operation of the printer in such
an environment constitutes a definite safety hazard.

Panduit PanTher LS8EQ Specifications

General

Color	-
Print technology	Thermal transfer
Vertical printing	Yes
Maximum resolution	203 x 203 DPI
Maximum print height	- mm
Display	LCD
Product color	Black, Grey
Keyboard layout	QWERTY
Display number of lines	4 lines
Certification	RoHS, WEEE, FCC
Number of styles	3
Battery type	AA
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Number of batteries supported	6
PC connection	USB 2.0
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	5 - 40 °C
Operating relative humidity (H-H)	0 - 90 %
Cables included	USB
Bundled software	PanTherLink

Weight and Dimensions

Weight	80 g