Panduit PanTher LS8EQ - Setting up the P an T HER LS8 EQ and Using File Manager

SETTING UP THE PANTHER LS8EQ
AND USING FILE MANAGER
33
The P
ANTHER™ LS8EQ has the ability to store and recall label files. Label files
are stored and recalled within File Manager. Label files are designated with a
.LS8 ending.
To access the File Manager, press the SHIFT key and then press the PAGE key:
1. Use the right or left directional arrow keys to select the desired file. There
are 30 file storage locations in the P
ANTHER™ LS8EQ.
NOTE: When saving a new file, press the
key to begin entering a
file name. Use the alphabetic or numeric keys to enter a file
name. After entering a file name, press the
key again to
Save.
NOTE: When renaming a previously saved file, press the
key to
begin entering the new file name. Use the alphabetic or
numeric keys to enter the new file name. After entering the
name, press the
key again to Save. .
2. Use the up or down directional arrow keys to highlight Action.
3. Use the right or left directional arrow keys to select Save, Load, Delete, or
Delete All.
WARNING: Selecting Delete All will erase all stored labels.
4. Press the
key to complete the selected action.