13
2.4. Einlegen von Papier
• Druckeraussehen konnte unterschiedlich wegen seine Modelle sein. Die schematische
Darstellung ist nur zum Informationszwecken.
2.4.1. Einlegen von Papier in das Fach für automatischen Einzug
：To avoid the risk of electrical shock, if you are accessing the controller board or memory
devices after setting up the printer, turn the printer off, and unplug the power cord from the
electrical outlet before continuing. If you have any other devices attached to the printer, turn
them off as well, and unplug any cables going into the printer.
：To reduce the risk of equipment instability, load each tray separately. Keep all other trays
closed until needed.
1. Slide out the automatic feeder tray from the printer.
• To avoid paper jams, do not remove the tray while the printer is busy.
To Next Page
Loading...
Need help?
General