81
9.3. Network Settings
You can check or set network status via network setting.
1. Press “ ” on the printer control panel to enter the ready interface.
2. Press “▲” or “▼”, select “Network Settings” to set “Wired Network Setting”, “Wireless Network
Setting” and “Wi-Fi Direct” options.
• To set IP address, subnet mask and gateway, press direction key “▲” to circularly
accumulate values from “ -9”, press direction key “▼” to circularlly input the position
from left to right, press “OK” key to save setting and press “Return” key to return to the
previous menu.
To Next Page
Loading...
