60
7.2.2.2. Color balance
Color balance is used to adjust the amount of toner used for each color.You can change it
through the following steps as necessary.
1. Open the file to be printed, click the “File” menu in the upper left corner, and select “Print” to
enable the print driver.
2. Select printer of the corresponding model.
3. Click “Printer Properties/Preferences” to configure printing.
4. Enter the “Quality” option interface. Click “Color Balance”.
5. Select “Manual” among the options to adjust the parameters for the amount of toner for each
color to be used in the printed document.
To Next Page
Loading...
Need help?
General