NVX80 Installation Manual 13
NVX80 Menu-Driven Settings and Configuration 3
NVX80 Menu-Driven Settings and Configuration 3
3.1 OLED 4-button interface
The NVX80 introduces a unique 4-button interface and 16-bit OLED display screen. The NVX80 is completely menu-
driven, making programming and configuration simple. See Figure 9 below.
Figure 9: OLED Screen and Buttons
Back
Select
or Enter
Down Up
The OLED screen displays a variety of icons which indicate the current state of the detector. Alarm, pre-alarm, and Anti-
Mask events as well as notifications are displayed on the OLED. The menus provide direct control of the detector's
operation, the sensitivity level settings, display characteristics and more.
The NVX80 menu consists of the following categories: SeeTrue™, PIR,
Microwave, IR Anti-Mask, Wall Tamper, Outputs,
Diagnostics, Settings, About and Language. A full menu tree can be viewed in Appendix 1: Configuration Menu Tree
on page 31.
The following sections will describe all the menu it
ems in detail.
3.1.1 SeeTrue™
The Paradox SeeTrue™ (patent pending) technology, developed exclusively for the NVX80 motion detector, uses
advanced signal processing to significantly improve the detection response of dual-tech infrared and microwave
motion detectors.
SeeTrue™ can detect at the highest performance level, even w
here most PIR detectors fail. The NVX80 together with
SeeTrue™ can detect intruders in high temperature environments, detect camouflaged movements (to and from the
device), and detect intruders using insulated materials such as umbrellas, coats, cartons or other similar type of
materials that are used to breach common PIR detectors.
SeeTrue™ offers extended protection for areas within 14 m (46 ft) range from the detector. It is designed to be used
m
ainly in indoor environments (Creep Zone ON and Pet Immunity OFF). Beyond this range, the superior dual detection
performance will be maintained. SeeTrue™ offers three different configuration modes, they include Secure, Sterile, and
Idle.
NOTE: Enabling SeeTrue™ automatically turns OFF Pet Immunity.
To Next Page
Loading...
Need help?
General
