Paradox SP5500+ User Manual

22
SP+ Series Programming Guide
44
New trouble (partition 1 only, except sub-group 07, which is for
both partitions)
00 -
01 AC failure
02 Battery failure
03 Auxiliary current overload
04 Bell current overload
05 Bell disconnected
06 Clock loss
07 Fire loop trouble
08 Fail to communicate with monitoring station telephone # 1
09 Fail to communicate with monitoring station telephone # 2
11 Fail to communicate with voice report
12 RF jamming
13 PCS RF jamming
14 N/A
15 N/A
16 Fail to communicate IP receiver 1 (GPRS)
17 Fail to communicate IP receiver 2 (GPRS)
18 IP module no service
19 IP module supervision loss
20 Fail to communicate IP receiver 1 (IP)
21 Fail to communicate IP receiver 2 (IP)
22 GPRS module tamper trouble
99 Any new trouble event
45 Trouble restored
00 Telephone line restored
01 AC failure restore
02 Battery failure restore
03 Auxiliary current overload
04 Bell current overload restore
05 Bell disconnected restore
06 Clock loss restore
07 Fire loop trouble restore
08 Fail to communicate with monitoring station tel. # 1 restore
09 Fail to communicate with monitoring station tel. # 2 restore
11 Fail to communicate with voice report restore
12 RF jamming restore
13 PCS RF jamming restore
14 N/A
15 N/A
16 Fail to communicate restore IP receiver 1 (GPRS)
17 Fail to communicate restore IP receiver 2 (GPRS)
18 IP module no service restore
19 IP module supervision loss restore
20 Fail to communicate restore IP receiver 1 (IP)
21 Fail to communicate restore IP receiver 2 (IP)
22 GPRS module tamper trouble restore
99 Any new trouble restored event
Table 10: List of events
Event Group Event Group Description Sub-group Sub-group Description

Paradox SP5500+ Specifications

General

StayD Mode	Yes
PGMs	4 programmable outputs
Partitions	2 partitions
Expandable via Bus	Yes
Outputs	4 programmable outputs
Power Supply	1.5A
Battery Backup	7Ah