Paradox SP5500+ User Manual

SP+ Series Programming Guide
55
Keypad Letter Assignments
The following section outlines the different configurations for keypad letter assignments, including those in Hebrew, Greek, and Russian.
Trouble Display
The following section provides information on the different troubles associated with your SP+ control panel. To view the trouble display, press TBL on your
SP+ keypad. Table 52 outlines the troubles appearing in the main menu and their corresponding sub-menu troubles. To view the sub-menu troubles, press the
trouble’s respective key in the main menu.
NOTE: Keypads can be programmed to emit a beep every five seconds, whenever a new trouble condition has occurred. Press
TBL to stop the beeping.
Table 52: Description of troubles for SP+ control panels
Key Main Menu Trouble Key Sub-menu Trouble
1 Wireless zone low battery 1 to 32 Zones in low battery
2 Power trouble
1 Low/no battery on the control panel
2AC failure on control panel
3 Auxiliary overload on control panel
4 Wireless keypad AC failure
5 Wireless keypad battery failure
6 Wireless repeater AC failure
7 Wireless repeater battery failure
8 Wireless siren AC failure
9 Wireless siren battery failure
10 Remote low battery (press [0] to view which remote)
3Bell trouble
1 Bell disconnected on control panel
2 Bell overload on control panel
Table 50: Standard keypad letter assignment
Key
Press Key
Once
Press Key
Twice
Press Key
Three Times
1ABC
2DEF
3GH I
4JKL
5MNO
6PQR
7STU
8VWX
9YZ
Table 51: Greek keypad letter assignment
Key
Press Key
Once
Press Key
Twice
Press Key
Three Times
1 ABG
2 DEZ
3 HQ I
4 KLM
5 NO
6 PRS
7 TUF
8 CYW
Figure 6: Hebrew keypad letter assignment
Figure 7: Russian keypad letter assignment

Paradox SP5500+ Specifications

General

StayD Mode	Yes
PGMs	4 programmable outputs
Partitions	2 partitions
Expandable via Bus	Yes
Outputs	4 programmable outputs
Power Supply	1.5A
Battery Backup	7Ah