23
General facts
InformationOperationHelp
- Functions of the secondary systems -
6.1.2 Control element
The primarily used control elements are described. Other
control elements are possible. Your service technician can
address any additional instructions that may be necessary.
10-button touchpad
2 pushbuttons with LED status light for feedback of the action.
• IGN
-> Switches the ignition current for the vehicle on or off.
• START
-> Starts the vehicle engine (starter switch).
ThepushbuttonshaveablueLEDstatuslightforconrming
the respective action.
Fig. 6: 10-button touchpad