25
General facts
InformationOperationHelp
- Functions of the secondary systems -
...“Engine start“ with 10-button touchpad
Starting vehicle engine:
• Press the "IGN" pushbutton for at least 2 seconds
-> Ignition ON.
-> Blue LED status light will be lit.
• Press the "START" pushbutton and hold it until the engine
start.
-> Vehicle engine will start.
->BlueLEDstatuslightwillstartashing.
Stopping the vehicle engine:
• Press the "IGN" pushbutton for at least 2 seconds
-> Ignition OFF.
-> Vehicle engine will stop.
-> Blue LED status light will go out.
Fig. 9: Stopping the vehicle eng.