Paravan SPACE DRIVE SYSTEM - Fig. 35: Acoustic Signals

51
General facts
InformationOperationHelp
-Freelycongurablecontrolelements-

Operation is based on the "reading by hearing" principle.
This means that there is a certain action behind each acoustic
sequence (similar to Morse code).
Example of a signal output:
• Beep...beep...beep...beep...beep
-> Wipe/wash function active.

The duration of the signal output as well as the duration of the
pauses between the tones can be adjusted individually.
Standard programming (sequence) of the beeper:
• High-beam lights
• Left turn signal
• Right turn signal
• Signal horn
• Wipe/wash function
• Wiper interval
• Wiper stage I
• Wiper stage II
• Wiper OFF
• Hazard lights
Fig. 35: Acoustic signals