Parceltools C190 CubetapePRO - 2.3.5 Append; 2.3.6 Return to Last Recorded Data; 2.4 Tasks

Technical manual-C190CubetapePRO
11
2.
2.3.5 Append ( if activated in Settings )
The Append function enables the operator to add up to three length
measurements together, useful when the item length is longer than the
3 meter tape.
•
The append function enables the operator to sum three measurements of length
together, especially when the item length is longer than the 3 meter tape.
•
When in Length measurement position - Press to Append measurement 1;
•
Measure length 2 and if needed length 3;
•
Record appended measurement by pressing whiles take your last measurement ;
•
The length recorded will be the sum of length 1, 2 and length 3.
2.3.6 Return to Last Recorded Data
•
Press several times until the cursor is in the length field;
•
Press will display the last recorded measurement on screen.
2.4 Tasks
The CubetapePRO provides five different tasks, which can be directly accessed on
the device. When the device is turned on, it will be set up for the Task last used.
If a different task is needed, the operator has to access the menu to load a different task.
Enter the Tasks menu from current operation by pressing and together.
The four buttons on the front panel can be used for navigation and selection.
See Section 1.7.2 for more details.
Figure 2-3