Parceltools C190 CubetapePRO - 2. Operation; 2.1 Overview; 2.2 Power On;Off

Technical manual-C190CubetapePRO
7
1.
1.7.2 Button + Brake Operation
The CubetapePRO has five main buttons.
The four buttons on the front are used for navigation or data collection purposes.
The button – press to record measurement
The button – press to scan a barcode label
The button for power on/off. Buttons are context sensitive.
Figure 1-3
Tape retraction brake
The manual retraction brake on the side of the
Cubetape must be used at all time when the
tape is retracted and develops high speeds
which could damage the tape tip