Parceltools C190 CubetapePRO - 3.3.1 Cubetape Manager Software Download; 3.3.2 Cubetape Manager Software Installation; 3.3.3 Connect the device to Cubetape Manager software

Technical manual-C190CubetapePRO
20
3.
3.3.1 Cubetape Manager Software Download
The software can be accessed and downloaded from the link below:
www.cubetape.com
3.3.2 Cubetape Manager Software Installation
•
Extract the ZIP file into a new folder after downloading
•
Click on CubetapeManager.exe to install the application
3.3.3 Connect the device to Cubetape Manager software
USB connection is the supported method for connection.
•
Turn on the CubetapePRO device.
•
Connect the CubetapePRO with PC by plugging in the USB ports with the USB
cable at both ends. Typically, a new serial port will be automatically installed. If
the driver fails running automatically, please download the driver from the
flowing link and install the driver manually: www.cubetape.com
•
Enter the Settings menu on C190CubetapePRO, select CubeTapeMgr
•
The Cubetape Manager interface displays connection status as “Connecting.”
•
See Figure 3-2.