2.1
Overview
This chapter provides information about the main functions of C190CubetapePRO,
including button usage, display options, basic field operations and workflows.
Operation of the device depends on which functions are enabled. The functionality
discussed in this chapter is based on the device only, without any communication
or configuration from the Cubetape Manager software. For detailed information
about configurations via PC software, see Chapter 3.
2.2
Power On/Off
•
To turn on the device, short press .
•
* Legal for trade versions will present an info screen- press any key to proceed
•
To shut down the device, press
for approximately 3 seconds, then release when
“Power Off” is indicated on screen or five beeps are heard.
•
Cubetape will auto shut down after 10 minutes of no key press
NB -- Please charge your Cubetape regularly to avoid ‘low bat’ situations
Parceltools provide a convenient charger / cradle unit for this purpose.
2.3
Basic Functionality
This section provides information of some fundamental functions of C190CubetapePRO
The following functions are addressed in this section:
•
Scan • Measure
•
Transmit Data
• Insert Pallet
•
Append
•
Return to Last Recorded Data
To Next Page
Loading...