Parker 890SD - Mounting Dimensions

Page 10
Mounting Dimensions
W
H1
D
W1
H
J J K
L
M
The units must be installed in a cubicle. Mount the drive using the keyholes and slots.
Models
Maximum
Weight:
kg/lbs
H
H1
W
W1
D
Air Clearance
Fixings
J
K
L
M
Frame E
32.5/72
668.6
(26.3)
630.0
(24.8)
257.0
(10.1)
150.0
(5.9)
312
(12.3)
0
(zero)
25
(1)
70
(2.8)
70
(2.8)
Use M6
fixings
Frame F
41/90.4
720.0
(28.3)
700.0
(27.6)
257.0
(10.1)
150.0
(5.9)
355.0
(14.0)
0
(zero)
25
(1)
70
(2.8)
70
(2.8)
Use M6
fixings
All dimensions are in millimeters (inches)
Ventilation
The drive gives off heat during normal operation. Mount it to allow free flow of air through the
ventilation slots and heatsink. The mounting surface must be normally cool. Maintain the minimum air
clearances. Clearances are additive when mounting two 890 units together. Ensure heat from
adjacent equipment is not transmitted. Maintain the clearance requirements of other equipment.
Environmental Conditions
Operating ambient temperature 0°C to 45°C (32°F to 113°F)
Enclosure rating IP20 – UL(cUL) Open type
Atmosphere Dust free, non flammable, non-corrosive, <85% humidity,
non-condensing