Parker ac890 - Page 617

D-221 Programming
890CS Common Bus Supply - Frames B & D; 890CD Common Bus Drive and 890SD Standalone Drive - Frames B, C & D
2PREF Name Block Type Range Default ro\rw Notes
83.07 FAST STOP T-LIM TORQUE LIMIT REAL 0.00 to 300.00 % 150.00 % rw
84.01 AIMING POINT INVERSE TIME REAL 50.00 to 105.00 % 105.00 % rw
84.02 DELAY INVERSE TIME REAL 5.0 to 60.0 s 60.0 s rw
84.03 DOWN TIME INVERSE TIME REAL 1.0 to 10.0 s 10.0 s rw
84.04 UP TIME INVERSE TIME REAL 1.0 to 600.0 s 120.0 s rw
84.05 IT LIMITING INVERSE TIME BOOL 0 : FALSE
1 : TRUE
FALSE ro Output
84.06 INVERSE TIME OP INVERSE TIME REAL _.xx 150.00 % ro Output
84.08 IT WARNING INVERSE TIME BOOL 0 : FALSE
1 : TRUE
FALSE ro Output
85.01 HYSTERISIS ZERO SPEED REAL 0.00 to 300.00 % 0.10 % rw
85.02 THRESHOLD ZERO SPEED REAL 0.00 to 300.00 % 0.50 % rw
85.03 AT ZERO SPD FBK ZERO SPEED BOOL 0 : FALSE
1 : TRUE
TRUE ro Output
85.04 AT ZERO SPD DMD ZERO SPEED BOOL 0 : FALSE
1 : TRUE
TRUE ro Output
85.05 AT STANDSTILL ZERO SPEED BOOL 0 : FALSE
1 : TRUE
TRUE ro Output
91.01 INPUT SKIP
FREQUENCIES
REAL -300.00 to 300.00 % 0.00 % rw
91.02 BAND 1 SKIP
FREQUENCIES
REAL 0.0 to 500.0 Hz 0.0 Hz rw
91.03 FREQUENCY 1 SKIP
FREQUENCIES
REAL 0.0 to 500.0 Hz 0.0 Hz rw
91.04 BAND 2 SKIP
FREQUENCIES
REAL 0.0 to 500.0 Hz 0.0 Hz rw
91.05 FREQUENCY 2 SKIP
FREQUENCIES
REAL 0.0 to 500.0 Hz 0.0 Hz rw