- 79 –
18-06-08 PVD3668_GB_GVM_June_2018
4.3. Electrical connection
Warning : Check that the power to the electrical inverter is safely off prior to
make any connections.
Warning : The wiring must comply with the inverter commissioning manual,
with recommended cables, the standard and the local regulations
Warning : The GVM motor must be grounded by connecting to an unpainted
section of the motor.
Warning : Do not open the terminal box under voltage or when the motor is
rotating.
Danger : After 15 days, check all tightening torques on cable connection. Bad
connections can lead to overheating and fire.
4.3.1. Cable connection
Please, read §3.8 "Electrical connection" to have information about cable and terminal
box.
A lot of information are already available in the inverter documentations.