Parker GVM Series - Maintenance and Troubleshooting Guide

- 81 –
18-06-08 PVD3668_GB_GVM_June_2018
4.4. Maintenance Operations
Generality
DANGER: The installation, commissioning and maintenance operations
must be performed by qualified personnel, in conjunction with this
documentation.
The qualified personnel must know the safety local regulations.
They must be authorized to install, commissioning and operate in
accordance with established practices and standards.
Please contact PARKER for technical assistance.
Operation
Periodicity
Section
number
Cooling water quality inspection
Every year
§3.6
Check all tightening torques on all
screws in the terminals box
Every year
§4.2
Check the bearings
Every year
§3.5
Clean the motor
Every year
Inspect and lubricate shaft seals
Every year
§4.2.3
Inspect and lubricate shaft splines
Every year
Inspect coolant fittings, and hoses
Every year
§3.6
Inspect power and feedback cables
Every year
§4.3