Parker Parflange 1025 - Guidelines for Troubleshooting and Rectifying Errors

97
18.2 Guidelines for troubleshooting and rectifying errors
Problem Cause Solution
Motor will not run
No power supplied
Check the connection.
The fuse has blown
Replace the fuse,
see section A 20 .
The electric motor is
defective
Replace the motor,
see section A 40.
Motor is running but there is
no infeed
Air in the hydraulic system
Check the hydraulic system,
see section A 60.
Drive belt is defective or
slips
Check belt,
see section A 70.
No automatic shutdown of
the infeed
Air in the hydraulic system
Check the hydraulic system,
see section A 60.
The pressure switch is
defective
Check the pressure switch,
see section A 60.
Flaring pin lubrication not
working
Air in the hydraulic system
Check the lubricant supply,
see section A 50.