Parker Parflange 1025 - Access to Internal Components

101
The machine must be installed
on a stable and fixed
substructure prior to any
maintenance work .
Disconnect the flaring pin
lubricating tube
Loosen both M5 screws (D) and
remove the front cover.
Take off the back (B) by removing the
6 x M5 screws.
Maintenance sheet
Number
Index
Parflange
1025
Page
FIP025GB001 01
1/2
Access to internal components
A 10
0H20
Access to solenoid valve,
pressure switch, power box
and fuse
The machine must be
disconnected from the
electrical supply before
opening.
Remove cover (A) by bending the
sides upward.