73
11 Functional check following initial start-up
Activate the “Start” button (the piston moves forward).
The machine must be switched off using the “Stop” button in the event of a
malfunction.
The power plug must then be pulled out.
See section 17 (Hydraulics fault) in the event that the cylinder does not move
forward.
12 Dismantling and preparation for transportation
There may be no loose tools or other items located on the machine that
could fall off during transportation.
The cable must be reeled in and fastened onto the machine in such a way
that it cannot become entangled during transportation.
To Next Page
Loading...
