Parker PSD1-S - Mounting and Dimensions PSD1-M Size 1

Mounting and dimensions
24 (31) 192-011003N7 DOC-0001-01-B 11.12.23 11:39
6.1 Mounting and dimensions PSD1-M size 1
The devices are force-ventilated via a ventilator fan fixed to the lower part of the heat
dissipator!
Mounting spacing: At the top and below: at least 100mm
Information on
PSD1-M Size 1
• Multi axes servo drives and
• Mains Module PSD1-M_P010
Mounting:
2 socket head screws M6
Lateral distance of fixing of mounting holes: 50.5 mm
Required mounting distance for heat regulation at the top and below: At least 100mm
Please check regularly the firmness of the screw connection!
Tolerances: DIN ISO 2768-f