Index
30 (31) 192-011003N7 DOC-0001-01-B 11.12.23 11:39
- Industry and trade - • 11
A
Accessories • 13
B
Before commissioning the drive, please observe
the following: • 10
C
Cable installation: • 12
Cautionary Markings • 9
CE declaration of conformity PSD1-M • 13
Conditions of utilization • 11
Conditions of utilization for CE-conform operation
• 11
Conditions of utilization for the cUL certification of
PSD1-S • 13
Connecting protective earth • 12
Connection length in-between mains filters &
device • 11
Control requirements • 13
D
Designated use • 6
Device assignment • 5
E
Environmental requirements PSD1 • 28
Explanation of the safety instructions • 7
F
For Safety Use • 7
Front view (PSD1-M) • 15
Front view (PSD1-M_P Mains Module) • 21
G
General hazards • 8
Grounding request • 13
I
Introduction • 5
M
Mains connection Power module PSD1-M_P010
with line choke • 27
Mains Connection Power module PSD1-M_P010
without line choke • 26
Mains connection Power module PSD1-M_P020
with line choke • 28
Mains Connection Power module PSD1-M_P020
without line choke • 27
Mains filter for use in industrial areas • 11
Motor and feedback cable requirements • 12
Motors • 12
Mounting and dimensions • 23
Mounting and dimensions PSD1-M size 1 • 24
Mounting and dimensions PSD1-M size 2 • 25
N
Notes on the use in domestic environments • 13
P
Packaging, transport, storage • 6
Plug and device overview PSD1-M • 14
Plug and device overview PSD1-M_P (mains
module) • 21
R
Request for motor cable PSD • 12
Responsibility • 10
S
Scope of delivery • 5
Shielding connection of the PSD motor cable • 12
Signal interfaces IO Optionboard • 19
Size / Weight PSD1-M • 29
Special dangers • 8
T
Technical data • 26
Type identification plate PSD1-M • 5
Type identification plate PSD1-S and PSD1-M with
Safety Option Board • 6
U
UL certification • 13
V
View from above (PSD1-M) • 18
View from below (PSD1-M) • 16
View from below (PSD1-M_P mains module) • 22
W
Warranty conditions • 10
What is necessary and where to find it? • 4
Working safely / qualification • 8
X
X30, X37 Digital inputs/outputs / 24V power supply
• 19
X31, X38 Analogue inputs / Encoder • 20
To Next Page
Loading...
