Parker PSD1-S - Introduction; Device Assignment; Scope of Delivery; Type Identification Plate PSD1-M

192-011003N7_PSD1-M_Short_Description
192-011003N7 DOC-0001-01-B 11.12.23 11:39 5 (31)
In this chapter you can read about:
• Device assignment ..................................................................................................................... 5
• Scope of delivery ........................................................................................................................ 5
• Type identification plate PSD1-M ................................................................................................ 5
• Type identification plate PSD1-S and PSD1-M with Safety Option Board ................................... 6
• Designated use .......................................................................................................................... 6
• Packaging, transport, storage ..................................................................................................... 6
• For Safety Use .......................................................................................................................... 7
• Before commissioning the drive, please observe the following: ................................................. 10
• Warranty conditions ................................................................................................................ 10
2.1 Device assignment
This manual is applies for the following devices:
• PSD1-M_1300 (5 A)
• PSD1-M_1400 (8 A)
• PSD1-M_1600 (15 A)
• PSD1-M_1800 (30A)
• PSD1-M_2220 (2 A + 2 A)
• PSD1-M_2330 (5 A + 5 A)
• PSD1-M_2440 (8 A + 8 A)
• PSD1-M_2630 (15 A + 5 A)
• PSD1-M_3222 (2 A + 2 A + 2 A)
• PSD1-M_3433 (8 A + 5 A + 5 A)
• PSD1-MWP010 (Mains module 10 kW)
•
PSD1-MWP020 (Mains module 20 kW)
2.2 Scope of delivery
Included in delivery are mating connectors for:
PSD1-M:
X17 / X21 (Push-in)
X45, X46, X48
Tin angle with screw terminals for motor and feedback cable
PSD1-M_P:
X4 (Push-in)
X9, X40, X41
2.3 Type identification plate PSD1-M
The present device type is defined by the type specification plate (on the housing):
1
Order code of the device
2
Serial Number
3
Input voltage
4
Input Current
5
UL certification
6
Output voltage
7
Output current
8 Output frequency
9
IP Rating
2. Introduction