Parker Sporlan S3C - Initiate Manual Defrost; Verify Defrost Across Circuit

SD-453 – Page 5

Click here

All the DMs should look like this

Figure G - Initiate Manual Defrost
(See Step 4)
Figure H - Verify defrost across circuit
(See Step 4)
Figure I - Expected system changes when placed in
“Off Time Defrost”
(See Step 4)
Should be at 0%

Solenoid should
be CLOSED


EEV1 (EEV2 and EEV3)
should either be
blank or at 0%

Change this
switch from
OFF to ON

Click SAVE after
switch is set to ON